All ITALIAN made, with highest of European standards, Dugda has 3 hydraulic rigs, 1 Grout machine and a fully equipped Anchoring, Anchor testing and short-creting equipment. CASAGRANDE B250 XP, B175 XP and C6 are the major piling rigs capable of performing at the highest efficiency each reaching maximum drilling depth of 46m and 34m respectively. The C-6 is an anchoring (micro-piling) hydraulic rig which is equipped with grip unit (elevator clamp) at the lower mast section for the assembly and dismantling of drilling rod and casings. Each of the hydraulic rigs are assembled and equipped with an auxiliary winch which makes the machines more compact and preferable as it reduces the prerequisite for a mobile crane on site during the construction period.
The wide range of machineries and equipment owned by Dugda, has allowed the company to not only be competent but also confident that it will execute the task required with the greatest of adeptness and pride. Ranging from soft to very stiff soil stratums, from small diameters (300mm) – large diameters (800mm) the drilling equipment can drill almost anything. Furthermore, in even the most un-favorable soil and ground water condition Dugda has borehole stabilization steel casing pipes to prevent borehole collapse.
In addition, Dugda has its very own concreting equipment. Whether pile, shot-crete or grouting, the machineries available will execute the task required with the highest of quality and specification. The air-compressor available for the shot-creting and grouting is Atlas Copco, which is able to supply a 12 bar pressure at a time. Available for shoring and anchoring works, besides the fully equipped anchoring and grouting machineries, load-application tools for the anchors are available and at our disposal.